Smart Mini CN900 Transponder Key Programmer,Supports Online update.Various types of vehicle anti-the fault detection, matching detection.Portable Super long standby,supports four kinds of frequency 850/900/1800/1900MHZ,Support, 11/12/13/33/T5/4C/4D/42/46/48/72G chip copy.
Smart CN900 Mini CN900 Transponder Key Programmer
TOP 5 Reasons to get CN900 Mini transponder Programmer:
1. Language: English/Chinese Firmware version: 126.96.36.199
2. Supports copy 4D chips,46 chips,72G chip.
3. Can recognize locked ID48 and can unlock ID48.
4. Copy 4D chip and Toyota G chip via CN5 chip
5. Can directly copy 4C and other chips like Toyota 4D67.
1.CN900 MINI supports all function of CN900, no need to connect with decoders to copy 4D,4C,46,G chips.
2.Can use CN5 to copy the G and 4D chip of TOYOTA
3.Free download update file in :www.cn900.net
4.Come with battery, can't be sent by EMS
Mini CN900 Firmware Update to V188.8.131.52.23 (May,17th,2016)
ADD Detect Hitag AES97(7A),88
ADD CNS,CN5-new to copy 4C 4D or 64 and to generate.
ADD Toyota 8A SMART-KEY type differentiation
Improve 3A,88,8E and 8A information show.
Mini CN900 Firmware Update to V1.13 (July 29,2016)
* ADD: Detect 8A chips (Toyota H) and distinguish between master and vice
* ADD: Toyota Smart Key renew
* Bug fixes: T5-20 copy 11, 12, 13, 33
* Bug fixes: 42 copy and blank PCF7935 copy 42 support
Video guide of:How to update CN900 Mini Key Copy Machine Firmware
CN900 Mini and ND900 Mini V5.18 update
TJECU MINI900 TOYOKEY OBD is newly confirmed to be able to write Toyota Smart card via OBD, it supports 3370-5290-A433-F433 types.
(Update notice: TJECU next update plan is to initialize Toyota 0020 type of 8A smart card with all key lost)
CN900 Mini Highlights:
RFID identifly 125KHZ 134.2KHZ 13MHZ
RF data reception 27-900MHZ
RF radio frequency identification,support all kinds of remote controls
RF Data transmission, supports all kinds of remote control simulation test
Various types of vehicle anti-the fault detection, matching detection
Portable Super long standby
Support four kinds of frequency 850/900/1800/1900MHZ
As for the products improvements, specifications are subject to change
CN900 Mini transponder Programmer:
1. Can directly copy 4C and other chips like Toyota 4d67.
2. Support copy 4D chips.
3. Can recongize locked ID48 and can unlock ID48.
4. Support copy 46 chips.
5. Support 72G chip.
CN900 MINI Main Features
1) Read out the chip code for 11 12 13 33 T5 40 41 42 44 45 46 48 4C 4D 8C and 8E chips. With the detail format for ID 48 and 4D Chips.
2) New identify functions for Toyota "G " chip key (year: 2010) (Chip: 4D-72).
And it will show if the key is the main key or the vice key for Toyota, and later will add new identify function for the Chinese Car.
It can identify Toyota smart key, and read out the data.
It supports on copying the chips (11 12 13 33 T5 41 and 42) and parts of 44 and 45.
Using "FREE " dedicated chips can copy none battery 4C and 4D chips directly.(Remark :cn1(4C),cn2(4D) is the name of special chip)
Support on the chip programming: with the inner function of HITAGETI, it can write ID 46 Renault Crypto chips.
Without removing the ECU (Benz W140), it can start the chip.
It can unlock the 48 chips except the crypto lock 48 chips.
Support on the pin code calculating for Hyundai and Kia (before 07 year), by using the Last 6 Codes of VIN Number.
Support on starting the key and calculating the pin code for more than 60 kinds of cars.
Support on programming all kind of Fiat key, such as (11, 13 and 33), These 3 kinds of 48 chips anti-theft way.
It Upgrade to identify HONDA_46 CRV_46/CIVIC_46/ Mitsubishi 46
Ordinary 60 can be programmed to be 66/67/68/71/74
It Upgrade to copy CN1 (4C), CN2 (4D) chip .And size is 6mmX12mmX4mm
Support on the software update, such as adding new function for copying the induction card for Electronic Gate.
Can copy all ID46 chip:
BMW 46 chip,ACURA 46 chips,Honda CRV FIT(NEW) Accord(2008) Civic 46 chips;Mazda haima 46 chips;Mitsubishi 46 chips;Buick GMC CRUZE 46 chip. New Chery tiggo A3 46 chips; Nissan TIIDA TENNA LIVINA Sylphy Nissan QASHQAI Q35 46 chip. Brilliance 46 chip.Peugeot/Citroen 307 206 -46 chips;Triumph Senna 406 (2001year);Picasso 46 chip.Suzuki swifts SX4 46 chip.Land Rover FREELANDER 46 chip. Geely dedicated 46 chip.
can copy 4D chip
Support 72G Chip copy
CN900 Mini Key Copy Machine PCB display:
CN900 MINI new update :
CN900 Package List:
1pc x Smart MINI CN900 Programmer
TJECU CN900mini 184.108.40.206 / 220.127.116.11 test results & FAQ
Post on TJECU CN900mini 18.104.22.168 & 22.214.171.124 test results, FAQ, guide and more.
- TJECU CN900mini test results:
– Its confirmed cn900mini and toyokey can add 71 smart key
I tried it today adding a smart key to a 2007 Toyota fitz with 71 chip and it worked like a charm
– CN900 Mini 126.96.36.199 is confirmed to read diamond keys with EML 10030A chip.
– Tested it on a Chevrolet Aveo 2012 – worked in seconds, no decoding. But that was to be expected. They use the easiest transponders.
–I bought the cn900 mini and appropriate ID46 chips. (5.5 € /piece)
Cloning worked for Astra H and Peugeot 307
-I still using version 1.13 and cloned few Opel 46 without hassle.
-Can clone ALL ID46 chips, i.e clone ID46 for OPEL(Vauxhall)/Peugeot/Citroen. Never failed on id46 to someone.
– I have copied about fifty ID46 keys with the CN900 mini successfully. Two times it failed (1x Renault Clio, 1x Opel Movano), because I can’t sniff data from ignition.
T5, 4C was never a problem. Sometimes it was not able to decode 4D. It starts decoding till 99 and then it stops.
I use 4C/4D carbon and different CN chips from Ali. I don’t know if original or not. They works all for me fine.
Firmware is 1.13 I don’t see a reason to upgrade.
For this money it is a small good tool.
– Here are the results of the TJECU CN900mini latest version (1.32) new “Partial 48 Decoding and Copy” function tested on VW Golf MK 4 , year 2002. Was Magic 2:
You have to update to version 1.32
Decode button is now working. After pressing the decode button, you have to sniff data from ignition lock of the car.
After that, decoding starts, and lasts for AT LEAST 20 minutes. You can see at the picture, that decoding is already 20 minutes in progress.
After that I left it for another 40 minutes. When I came back, the decoding was finished.
As you can see, the Secret Key is visible, but it shows “xxxx xxxx”
I don’t know what the meaning of those “x”-es is.
After the decoding, the function “Unlock” is working.
Also “copy” button is shown for coping to CN6 chip. I had CN6 chip to test, I ordered cn6 transponder for id 48 for mini cn 900 from here (Tested and it’s working (for version above 1.20).
The problem here is that decoding time is very long. Almost 1 hour.
- FAQ for reference
Q: I heard after this 188.8.131.52 update, ID48 cloning stopped working.
Anyone can confirm
A: I can confirm it’s working fine
Q: what new is in the 1.34 update comparing to 1.32.
And if it possible to copy key with CS protection (like in VW keys)
A: I can confirm it’s working fine
Q: So you guys say ID48 transponder cloning works, but what cars exactly does it support
It just reads the chip and asks for a CN6 – it doesn’t say anything about decoding and so on… So i guess it clones only the ID if the ID48 chip which is only the non-crypto info. Like TS888 supports cloning of older Chevrolet/Daewoo and KIA cars So it’s still nowhere near the functions of the Keyline tool and can’t even clone ID48 for old VAG cars around year 2000
Another thing I noticed – it can’t read “Megamos I” transponders.
– The ID48 was added just few months ago.
I did a Golf MK4, year 2002. Was Magic 2.
I plan to test also a newer car with CS protection.
I think, device isn’t cloning ONLY the chip ID, because it has decoded my chip for 1 hour.
So it has to be password or security bytes.
Then, where do you get cn6 transponder for id 48 for mini cn 900
Answer: I always order from here. It’s the guy who also sells CN900 mini devices. Tested and it’s working (for version above 1.20)
Q: I have a problem with my cn900 mini…touchscreen not working anymore when i select something it select another option
It’s someone that knows from where i can purchase touchscreen part
A:Open and check the connector of touch screen. CLean the pins with alcohol before plug in.
Q: So has 4C cloning fixed yet
A:yes, you have to use original cn1 chips, then where from do you get those original chips And how can you be sure they are original if you can’t test them on CN900mini before ordering
A: fake cn1 chips are very old
most sellers on ali have new chips cn1 original
i ordered 2 last times and have original
tested on nd900 (to a friend) and on cn900,cn900mini
FAQ for Mini CN900
1.surely the cn900 mini is a better buy for the price can anybody confirm that the decoders are built in for 4d and 46 on mini cn900 if so is a winner as handy baby twice the price.
2.Personally I clone a Ford 4D63 into a cn2 chip with mini cn900 and a friend told me he clone a Toyota G chip into a cn5, no internet or decoder box, will keep testing as times go.
2.Guide for decode Toyota G Chip with Mini CN900/ND900.
If you are using MINI CN900 or MINI ND900 to decode Toyota G Chip, the device will consume the tokens per time.
The device MINI CN900 or MINI ND900 include 12tokens in default.
when you use it up, you can provide us the device serial number to rechagre tokens for your mini cn900 or mini nd900.
2.How to Use CN900 MINI/ND900 MINI to Renew Smart Card
Now it’s very easy to use cn900 mini/nd900 mini to clear the smart car key, and the cleared smart keys can be used repeatedly.
Next, we use CN900 MINI and Toyota Smart key as an example.
Step1 Start your CN900 MINI
Step2 Put the Toyota Smart key into the Transponder area.
Step3 Choose the “CLEAR BYTE” to erase the original data so that it can be re-matched to the car.
Step4 Choose “YES’ and wait a moment. And don’t move the key
3.How a CN900 Mini copy Lexus 4D-48 car Key Chip
Just copied a new Lexus 4D-48 chip key by using CN900 Mini
car key copy machine within 2 minutes.
Power on CN900 mini key programmer
Please wait… Don’t move the key
CN900 Mini read car key chip data
Remove key from CN900 Mini
Insert car key chip into Mini CN900
Press on COPY button on the main screen
Please wait… Don’t move the new key
Click Setup on CN900 main function menu
Select power it off.
4.CN900 Mini & ND900 Mini which is Original?
Both CN900 Mini and ND900 Mini key copy machines are available in obd2eshop.com. Which one is original?
Both CN900 Mini and ND900 Mini are original products from TJECU company.
They are made by the same manufacturer but distributed to different dealers. Tat’s why there looks slightly different each other.
1. Mini CN900 and ND900 support same function: 11/12/13/33/T5/4C/4D/42/46/48/72G chip copy
2. USB2.0, GSM/GPRS SIM, support same frequency, RF data, RFID identify etc
3. They comes with same firmware version, latest goes to V1.13. Build with same PCB.
4. Update online. Share the same update procedure
1. MINI ND900 looks almost the same as CN900 mini (difference is it has TJECU logo on the plastic)
2. Update on different websites
Although they share the same update procedure, they have different update file from their own websites.
CN900 Mini official website: www.cn900.net
ND900 Mini official website: www.mini900.cn
Update procedure goes here:
How to update MINI CN900/ND900 key programmer?
1. Browse to ND900/CN900 Mini official website, register and download Updater file respectively.
2. Delete previous updater file (updater v1.8 etc)
3. Open newest updater v1.9 setup.exe
4. Click on Update button
5. The main module of firmware is updating. Wait upgarde procedure complete.
6.FAQ for Mini CN900:
Q:Does CN900 Mini reuqire to connecte with computer when do RF data reception, RFID identify etc?
A: Mini CN900 PC software will be released soon. Software currently not available.
Q: Can i read eeprom with XPROG, then connect MINI CN900 with computer to program eeprom key?
A: Yes, but technical skill is required.
Q: Can this Mini cn900 read Kia pin code?