Original Autel MaxiIM IM608

CGDI MB adds Benz Kline W202 W208 W210 Key


Topic: How-to's of CGDI MB adds Benz Kline W202 W208 W210 Key via OBD
Procedure:
This is new key to be programmed
CGMB_Adds_Old_Benz_Kline_W202_W208_W210_Key_via_OBD_01
Step 1: Calculate Password
Plug CGDI MB to the laptop and vehicle
Open CGDI MB software
CGMB_Adds_Old_Benz_Kline_W202_W208_W210_Key_via_OBD_02
Go to EIS->Read EIS data
Choose Computer Password-> Copy key with key-> Collect data.
CGMB_Adds_Old_Benz_Kline_W202_W208_W210_Key_via_OBD_03
 
Collect data by following the below 7 steps:
1.Insert the original key into EIS and press OK
This is a k-line EIS, the operation is different from the ordinary EIS.
CGMB_Adds_Old_Benz_Kline_W202_W208_W210_Key_via_OBD_04
2.Insert the key into CGDI MB and wait for collection
 
3.Insert the car key into EIS 10s and remove
Make sure to twise the key to ON position and turn on
instrument. If failed, pull out the key and try again. Press OK to continue.
 
4.Insert the key into EIS
CGMB_Adds_Old_Benz_Kline_W202_W208_W210_Key_via_OBD_05
CGMB_Adds_Old_Benz_Kline_W202_W208_W210_Key_via_OBD_06
 
  1. Remove the key for 5s and then insert the key into EIS
 
6.Insert the key into CGDI MB
 
  1. Save the generated files.
CGMB_Adds_Old_Benz_Kline_W202_W208_W210_Key_via_OBD_07
CGMB_Adds_Old_Benz_Kline_W202_W208_W210_Key_via_OBD_08
 
8.Save the file successfully. Upload the data to calculate password.
CGMB_Adds_Old_Benz_Kline_W202_W208_W210_Key_via_OBD_09
 
Upload data successfully. Press Query Results to calculate pass--done.
CGMB_Adds_Old_Benz_Kline_W202_W208_W210_Key_via_OBD_10
CGMB_Adds_Old_Benz_Kline_W202_W208_W210_Key_via_OBD_11
Copy and paste the pass to EIS Key password box and then save it.
CGMB_Adds_Old_Benz_Kline_W202_W208_W210_Key_via_OBD_12
Select Generate EE->V051-> Load EIS file.
CGMB_Adds_Old_Benz_Kline_W202_W208_W210_Key_via_OBD_13
 
Upload EIS file just saved-->Press Generate Key File-->The key file was generated successfully.
CGMB_Adds_Old_Benz_Kline_W202_W208_W210_Key_via_OBD_14
 
Go to Read/Write Key->IR --->
read the key/chip
CGMB_Adds_Old_Benz_Kline_W202_W208_W210_Key_via_OBD_15
 
Then Open/Write
CGMB_Adds_Old_Benz_Kline_W202_W208_W210_Key_via_OBD_16
 
For Smart key choose 41 format, for common key and BE key choose 51 format.
 
Select a key file and write it.
CGMB_Adds_Old_Benz_Kline_W202_W208_W210_Key_via_OBD_17
Write key success.
CGMB_Adds_Old_Benz_Kline_W202_W208_W210_Key_via_OBD_18
 
Test the new key. Works good.
Job is done.